VIP Balancer

VIP-Balancers should be installed into 4 Leg sling assemblies (2x 2 Leg) for an equal load distribution to all 4 legs. This will compensate the length tolerances of the single legs. You can calculate with 4 load bearing strands if the following criteria are fulfilled (DGUV rule 109-017):

  • Two 2 Leg slings - One sling with a balancer
  • Both 2 Leg slings will be attached to one hook (single or double crane hook)
  • Symmetrical load spreading
  • Maximum inclination angle ß 45°
  • Inspection and documentation made easy! By the RUD-ID-System (equipped with own RFID chip).
  • 4:1 min. safety factor for lifting and 2:1 safety factor for lashing capacity.
  • 380 C Max
  • -40 - 200 C

Product Variants (8)